A padding blank is suitable for the targeted relief of certain areas of the sole of the foot solely through the effect of the padding.

In this way, large areas such as the forefoot or the heel can be relieved, but also smaller areas such as the tips of the toes.

The blank has a thickness of 30 mm and a padding in selected areas with a thickness of 6 mm and a hardness of 15 Sh/A.

Functional blanks offer a material composition selected by us in different shore hardnesses.

The blank always consists of two solid materials that have a hardness of 35 Sh/A and a selected softer area of 25 Sh/A. Due to the selected distribution of the degrees of hardness over different areas, an increase in the effectiveness of the insole is possible for special purposes.

Inlay blanks are specially designed for use with sport-specific insoles.

The special structure of the insole counteracts the overloading that is typical for the respective sport while at the same time positively influencing the power transmission and thus the performance yield.

Due to the difference in hardness of 20 Sh/A, the blank offers the foot optimum comfort.

The insert covers also support the effect of the insert through special functions and properties such as breathable, antifungal, washable, and much more.

Depending on the intended use of the insole, there are suitable covers such as B. for use in sports, everyday life, for sweaty feet, etc.